The Eagle indoor electric helicopter is an ideal introduction to more
advanced R/C heli's. Powered by high performance, high quality
receiver/electronic/speed control and gyro keep this helicopter light and
stable. Full parts availability ensures that when accidents occur, we can get
you flying again with minimum of fuss.
The Eagle 50 is ready to fly out of the box within minutes. Everything needed to
fly is included and installed such as a battery pack, motor, electronic and a 6
channel 72Mhz FM radio system. All that is needed are 8 "AA" batteries for the
transmitter. Plus, each Eagle 50 is test-flown at the factory to ensure precise
performance and control which makes it truly ready to fly right from the box.
We are also proud to offer this magnificent model as 3D capable right out of the
box. Combining the knowledge of RC nitro collective precision along with the
most advanced micro electric design concepts, we have arrived at a model that
excels prepared to wipe out the competition. The Eagle 50 offers collective
pitch control that will let helicopter pilots to fly in almost any direction.
Transitioning from forward flight to hover with smooth, solid control is a cinch
and negative pitch is a breeze for aerobatics like loops and rolls.
The installed mixing board controls mixing of the main and tail rotors. The
board also contains 2 speed controls, a peizo gyro for tail stabilizing and a
BEC circuit that supplies power to the receiver and servos
Expect only the best as you experience tight, precise control and quick response
as the Eagle 50 will dazzle you with agility and speed. Using the basics of
micro electric design to keep components light and durable while distributing
heat away from electronic, the Eagle 50 is not only precise, but also efficient.
When you combine precision and efficiency and add beauty, you will arrive at the
Eagle 50: The Ultimate Super-Micro Electric Helicopter.
 |
| ¡@ |
 |
 |
| Advanced component
configuration design provides perfect balance |
High Performace Tail motor
provides precise control |
|
 |
 |
| Standard metal head block
provides solid and smooth control |
CCPM mode. 3D conversion and
alterable pitch system |
¡@ |
|
Pre-built 300 size Eagle 50 Mini RC Helicopter, zero assembly time, Ready
to fly out of the box
|
|
6-channel FM 72 Mhz multifunctional transmitter with 3D conversion. PIT
and PLT adjusting knob
|
|
CCPM mode. 3D conversion and alterable pitch system
|
|
4-in-1 receiver unit (electronic gyro, mixer, motor controller, receiver)
|
|
Highly efficient tail motor with elaborate structure
|
|
Computer Simulation Cable included (Computer simulation software not
included)
|
|
English User Manual
|
 |
| ¡@ |
 |
|
|
550 MM |
22 inch |
|
Tail Rotor Diameter:
|
150 MM |
6 inch |
|
|
580 MM |
23 inch |
|
Overall Height:
|
180 MM |
7 inch |
|
All-up Weight:
|
540g (battery included) |
19 ounce |
|
Battery:
|
11.1V 800mAh /10C rechargeable Lipo battery |
|
Power:
|
370 carbon brush motor |
|
Servo:
|
3 x 7.6g |
|
Pitch Control:
|
Rubber, alieron, elevator and
throttle, CCPM mode, 3D conversion and alterable pitch system |
|
Radio System:
|
6 Channel FM 72Mhz, include a
pair of interchangeable crystal |
|
Charger:
|
Quick 110V wall charger |
|
Computer Simulation:
|
Serial simulation cable
(software not included) |
|
