• New 7 channel Transmitter with PIT and PLT mode lock switch, adjustable knob , rudder mixing, throttle curve, servo exponential function, rudder exponential functions, and multistage electricity volume show on the panel
• 7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
• Brand new design for the structure; Metal main frame
• NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
• The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
• Highly efficient bevel wheel design is used in mesh between main gear and motor gear
• Outer-rotor motor as the main power is powerful and makes the flight much stable
• 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
• CCPM mode with adjustable pitch system and 3D conversion
• Autorotation landing protection
• One-way bearing and landing system with flameout function
• Tail rotor driven by belt transmission system provide stable flight and low noise
• Mode lock switch to free lock the parameters of PIT & PLT
• Main rotor driven by powerful Brushed Motor and tail rotor driven by belt transmission system
• NO TAIL Motor - Tail Rotor driven by belt transmission system with Servo Controlled Rudder like Gas-Helicopter

Highly efficient bevel wheel design is used in mesh between main gear and motor gear.

• No need to worry about burning tail motors
• Tail blade adopt flameout landing system
• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
• Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
• Perfect for people who wants to move up from 4ch helicopter
• PCM receiving and transmitting system increases the operation stability
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
• Almost Unbreakable Rotor Head
• High quality individual lock tail gyro
• Outer placed gyro
• Provide excellent performance outdoor and indoor
• Easy to fly and more stable lifting
• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
• Quality swashplate has improved the stability and sensitive of the whole machine
• Newly Designed Rotor Head gives better control
• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
• Extreme smooth control and stable flight
• Precise controlling and hovering
• Can fly in skyway, backward, and 3D aerobatic
• Digital Proportional Motor Speed Control
• Suitable for Indoor/Outdoor/Backyard/Stadium
• Using the Ultra tough materials, the Helicopter does have very strong structure.
• Approximately 10 minutes flight time on each charge
• Best choice for Beginner - Advanced hobbyist
• All spare parts and accessories are available.

• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)

• Main rotor diameter: 622 mm (24.5 inch)
• Tail rotor diameter: 135 mm (5.3 inch)
• Overall Length: 590 mm (23.2 inch)
• All-up weight: 600 ~ 635g (Battery included)
• Driven system:  Brushed Motor
• Servo: 4X 9.1g (speed 0.12sec/60? torque 1.1kg/cm / dimension 22.5X11.8X27mm) Servos and WK-G007 outside Gyro
• ESC: WT-B20A speed controller
• Battery: 12V 650mAh Ni-MH
• Control system: 7CH CCPM Multifunctional FM Transmitter (WK-PCM-0701) and Receiver (RX-PCM-701)
• Radio Control Range: 2500 feet (762m)

• Helicopter (100% Assembled)
• 7 Channel Multifunctional FM R/C Transmitter
• Wall Battery Charger (GA-003)
• High Quality 12V 650mAh Ni-MH Rechargeable Battery
• English Manual